Survey WorkbookA field manual for survey instructionGet COGO
Traverse arithmetic

Carry four azimuths around a traverse

Rebuild an azimuth ledger from four right turns, mark the backsight at each occupation, and recover the independently supplied starting direction.

On this pageField observationsWorked solutionChallenge the ledgerTeaching notes

The first course has azimuth 350°00′. The next recorded angle is 110°00′ right. A student who simply adds them gets 100°00′. A student turning at the occupied station gets a different answer. Set up a station ledger that decides the question without guessing from the drawing.

Field observations

This is an angular traverse exercise. All directions refer to the same north reference. A right angle observation here means a clockwise turn of the recorded magnitude from the ray toward the previous station to the ray toward the next. The words “angle right” describe the sense of the turn, even when the turn is not 90°.

Occupied station Backsight Foresight Clockwise turn
B A C 110°00′
C B D 75°30′
D C A 94°15′
A D B 80°15′

A separate orientation gives the forward azimuth A–B as 350°00′. Distances are intentionally absent. Your task is to derive B–C, C–D and D–A, then use the final observation at A to recover the known forward direction. Record one column for the incoming course, another for its reciprocal, and a third for the outgoing direction.

Before calculating, draw A–B almost due north, tilted slightly west. Stand mentally at B and point back toward A. Decide whether the next sight should lie east or west of the occupied station after a clockwise turn of 110°.

Worked solution

At B the instrument zero points to A. Turn the incoming azimuth around by 180°. The result is 170°00′. Add the observed 110°00′ to get B–C = 280°00′. It points west and slightly north, which agrees with the sketch.

At C the incoming azimuth was 280°00′, so the backsight C–B is 100°00′. Turn through 75°30′ to obtain C–D = 175°30′. At D the backsight D–C is 355°30′. Adding 94°15′ yields 449°45′. Subtract a full revolution and record D–A = 89°45′.

Occupied Computed backsight Computed outgoing
B 170°00′ 280°00′
C 100°00′ 175°30′
D 355°30′ 89°45′
A 269°45′ 350°00′

At A, 269°45′ plus 80°15′ produces 349°60′, which normalizes to 350°00′. The final line therefore recovers the independently supplied starting direction. Record the angular check as 0′ at the precision of the inputs.

Challenge the ledger

Swap the turn values at C and D. The total of all four turns remains 360°. The final azimuth check still passes, but the intermediate C–D direction changes by 18°45′. A sum condition does not test that each particular angle was assigned to the right station. Station IDs and sketches do that job. An independently observed intermediate direction provides a stronger check.

Can you determine whether this traverse returns to the starting coordinate? No lengths were provided. A set of consistent directions can describe sides of many different lengths. Angular closure and coordinate closure are separate questions and require different observations.

Teaching notes

For partial credit, inspect the backsight column first. A 180° discrepancy at B usually means the student used the incoming forward ray as the instrument zero. A correct angular result written as 449°45′ shows sound arithmetic but needs normalization for the requested azimuth convention. Ask students to check one line in reverse by subtracting its observed turn from its outgoing direction. This establishes whether they understand the operation when faced with an unfamiliar starting bearing.

For a quick exit question, ask which observation fixes the overall rotation of the exercise. It is the supplied direction of A–B. Adding the same constant to every absolute azimuth leaves the four observed turns intact.

References

Practice the same traverse in COGO